Your electrical installation must be inspected and certified at least every 5 years. We test, certify, and — if anything needs fixing — put it right the same visit where we can.
An Electrical Installation Condition Report (EICR) is a formal inspection of the fixed wiring in a property — the consumer unit, sockets, switches, and cabling behind the walls. It's not a check of appliances; it's a check of the electrical installation itself against the current wiring regulations (BS 7671).
A qualified engineer tests every circuit, checks earthing and bonding, and inspects the consumer unit. Anything found is logged with a classification code, and the report is marked either Satisfactory or Unsatisfactory depending on what's found.
Under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020, every private landlord in England has these duties.
| Duty | Deadline |
|---|---|
| Have the installation inspected and tested | At least every 5 years, or sooner if the previous report specifies |
| Give existing tenants a copy of the report | Within 28 days of the inspection |
| Give new tenants a copy of the report | Before they move in |
| Complete any C1 or C2 remedial work | Within 28 days of the test date, or sooner if the report says so |
| Provide a copy if a local council requests one | Within 7 days |
Penalty for non-compliance: up to £40,000
Local councils can fine landlords per breach, arrange remedial work themselves and recover the cost from you, and — since 1 May 2026 — the maximum penalty was raised from £30,000 to £40,000 and the duty was extended to cover social housing too.
If your EICR isn't a straightforward pass, it'll list findings under one of three codes. Here's what each one actually means.
A risk of injury right now. We make this safe immediately, on the spot, before we leave.
Urgent remedial action needed. This is what makes a report "Unsatisfactory" and starts your 28-day clock.
Doesn't meet current standards but isn't unsafe. Noted for your awareness — no legal action required.
Every property's different, but here's the honest range for the remedial work we see most often.
A handful of C2/C3 items — missing RCD protection on a circuit, a loose connection, a damaged accessory.
Common on older properties with a dated plastic board — usually the single biggest line item on a fail.
These are typical ranges based on jobs we complete regularly — your actual quote depends on what the inspection finds. We always price remedial work before starting it.
Use our calculator for an instant budget estimate based on your property type and number of circuits.
Open the EICR CalculatorManaging more than one rental? We offer reduced per-property rates the more we do together, with a single point of contact and coordinated scheduling.
Standard rate, single EICR.
Discounted per-property price when booked together.
Portfolio rate, priority scheduling around your 5-year renewal dates.
Managing a portfolio? Tell us how many properties and roughly when each is due, and we'll put together a schedule so nothing lapses.
Yes — the duty applies to any residential tenancy, regardless of how long you've owned the property. If there's no valid, in-date EICR on file, you're not compliant.
Any C1 items get made safe immediately during the visit. C2 items need fixing within 28 days — we'll quote the remedial work on the spot and can usually book it in straight away.
Most standard 2–3 bedroom properties take 2–3 hours. Larger properties or HMOs take longer — we'll give you a time estimate when you book.
Yes, that's the most common scenario. We'll need brief access to turn circuits off one at a time — we coordinate timing with your tenant directly if useful.
Tell us how many properties you need testing and roughly when — we'll come back with a quote and the next available date.
Request Your EICR Quote